Mounting aid ofinto Rise

The control element allows you to adjust the table height to the exact centimeter by pressing it up and down. The display shows you the current height of the tabletop.

The control element allows you to save both a sitting position (table height below 90 cm) and a standing position (table height above 90 cm). To save a position, briefly press the M button (right-hand side of the control element) until the save request appears. Then press the M button again to confirm that the position has been saved. If the position has been saved successfully, the display confirms this with 1 or
2.

To automatically raise the ofinto Rise to the standing position, briefly press the control element up twice. To lower the ofinto Rise to the sitting position, briefly press the control element down twice.

The control element has a reminder function that reminds you to get up and move around.

Press and hold the M button to access the menu. Then briefly press the M button a second time to open the sub-menu. Here you can switch the timer on/off and select the exact reminder duration by pressing the handset up or down. Press the button to go to the timer view. The timer counts the time that the ofinto Rise spends in a sitting position (below 90 cm height). As soon as the sitting position remains active for longer than the time set in the timer, the control element vibrates.

Switch the reminder off by pressing the bell, moving the table to a standing position over 90 cm or waiting 25 seconds until the timer stops automatically. It will start again automatically as soon as you assume a sitting position.

Press and hold the M button to access the menu. Then press the handset down until you reach the Max-Min-Limit sub-menu. Then press the M button to open the sub-menu. Define your own limits by pressing the handset up or down.

You can use the child protection function to block operation of the handset. The handset remains locked until you unlock it. To activate the child lock, press and hold the M button to access the menu. Then press the handset down until you reach the lock sub-menu and open it with the M button. Then activate child protection by pressing the handset up or down for 10 seconds.

To deactivate child protection and unlock the ofinto Rise, press any button. A key sequence then appears on the display. Press this combination to unlock the handset and operate it freely again. The childproof lock reactivates automatically after 10 seconds. To deactivate it completely, deactivate the function via the lock sub-menu.

Press and hold the M button to access the menu. Then press the handset down until you reach the vibrate sub-menu and open it by pressing the M button. By pressing the M button, you can choose between three short, one long and one uniform vibration.

To reset the control element, e.g. if an error message occurs, press and hold the left and right buttons on the control element for 10 seconds until the reset icon appears on the display. Then press the control element down so that the table moves all the way down. As soon as the lowest point is reached, the table height appears again and the table is reset.