Product documents: Rise office desk

Yes, our 100% PEFC table tops are scratch-resistant. So you can write on paper without worrying that your notes will leave a mark on the ofinto Rise table.

Yes, but it is very important that the tabletop of your ofinto Rise is completely horizontal, as this can otherwise lead to wear on the motors. To compensate for slight unevenness, the ofinto Rise has four pre-mounted leveling glides on its table legs, which can be individually adjusted in height.

To reset the control element, e.g. if an error message occurs, press and hold the left and right buttons on the control element for 10 seconds until the reset icon appears on the display. Then press the control element down so that the table moves all the way down. As soon as the lowest point is reached, the table height appears again and the table is reset.

The control element allows you to save both a sitting position (table height below 90 cm) and a standing position (table height above 90 cm). To save a position, briefly press the M button (on the right side of the control element) until the memory request appears. Then press the M button again to confirm the position has been saved. If the position has been saved successfully, the display will confirm this with 1 or 2. To automatically raise the ofinto Rise to the standing position, briefly press the control element twice. To lower the ofinto Rise to the sitting position, briefly press the control element twice.

The ofinto Rise can be loaded with a maximum of 100 kg.

Delivery takes place within 5 working days. Various delivery options are available, including an assembly service with disposal of the packaging.